Series 100
36
Loading:
To be able to load the body using the auto-
loading tool, you must follow this procedure:
•
advance the machine towards the pile of material
maintaining the benna in a horizontal position;
•
raise the shovel by pulling the lever towards yourself
until you have poured the contents into the body.
Repositioning:
Push the lever forwards until the
bucket has lowered to the correct height from the ground.
Floating
(auto-levelling): the auto-loading tool may
also be used to function as an auto-levelling device,
useful, for example for levelling ground. To block the
bucket in the floating position you must push the auto-
loading lever forward past the lowering position until you
have heard a click (the lever remains in stable position).
CAREFUL: During the driving and movement
of the machine, the auto-loading device must
not remain the the floating position.
3.11. S
UPPLEMENTARY
H
YDRAULIC
C
OMMAND
Some versions may be equipped with a hydraulic
force instrument for the command of auxiliary equipment.
The hydraulic force instrument is composed of two
openings with rapid transmission of standard type,
indicated by the letters “
A
” and “
B
”, situated on the right
side of the dashboard.
To obtain hydraulic oil pressure on the openings you
must work the auxiliary command lever.
To obtain pressure on the “A” opening, push the lever
forward.
To obtain pressure on the “B” opening, pull the lever
backward, toward yourself.
READ CAREFULLY: Read the user’s
instructions carefully for all accessories
and/or tools that have been installed on your
machine. Always refer to the manual which
was provided with them and always keep it
attached to this manual.
3.12.
T
RANSPORT
WARNING: During transport, always position
the machine levelly to avoid the spilling of oil
or other liquids.
If the machine needs to be transported, one must
proceed correctly to avoid dangers to persons and/or to
the machine. Because of the weight of the machine, it is
