Instruction for use
35
depends on the position of the two “
A
” pins (
see fig. 48
):
If the pins are on the right side, body unloading shall
take place from the right side;
If the pins are on the left side, body unloading shall
take place from the left side;
If the pins are on the front, the body shall be tipped
forward.
WARNING – In order to avoid harming the
tipping mechanism, before unloading, make
sure that the two pins are positioned on the
same side of the machine.
CAREFUL: When raising the body for
unloading from one side, if you see that
the gate does not automatically open,
lower the body once more and manually
open the gate by pulling lever B under
the body platform (
see fig. 48
). Then raise
the body once more. To re-enable
automatic gate opening, at the earliest
opportunity, the operator is advised to
adjust the rods located in the vicinity of
the levers under the body platform.
fig. 48 – Unloading from side
3.10. U
SE OF THE
A
UTO
-
LOADING
Your machine may be equipped with an auto-loading
mechanism consisting of an anterior bucket that has a
hydraulic command.
CAREFUL: During movement the auto-
loading device must remain raised above the
surface of the land to avoid collision with the
terrain and must be in a position that does not
obstruct visibility.
