Corghi MONSTER AGTT, Operator'S Manual

Page: 52 / 218

52 Operator's manual MONSTER AGTT
DESCRIPTION OF CONTROL LEVER
COMMANDS FIG.13
1 Horizontal movement

turntable trolley and tool trolley translation
Vertical movement

turntable trolley translation
2 Button for using the second speed for turntable trolley and tool trolley translation
3 Vertical movement

tool unit lowering and lifting
Horizontal movement

tool unit rotation
4 Vertical movement

demounting position and tool search position
Horizontal movement

bead breaker disc inclination orientation
5 Vertical movement with return

automatic demounting command
6 Vertical movement

turntable rotation speed adjustment
7 Vertical movement

wheel height adjustment
8 Vertical movement

turntable opening and closing control�
Guard provided for preventing accidental contact
9 Bead breaker disc tangency dead-man switch
10 Tool tangency dead-man switch
11 Function reset button
12 Rim diameter setting buttons, 12a decreases the values 12b increases the values
13 Function button to press with:
button 12a to store a position other than those preset for the tools
button 12b to toggle between dimensions in inches and millimetres
button 14/15 to perform the side to side command with tool unit rotation
14 Button to control the side to side without tool unit rotation
to pass from the rear bead to the front one
15 Button to control the side to side without tool unit rotation
to pass from the front bead to the rear one
- Pedals (Fig� 14) that are used to rotate the turntable in a clockwise or anticlockwise
direction�
WARNING
When locking a rim, continue to operate the control to make sure that the maximum
pressure (180 bar) has been reached, which can be checked on the pressure gauge
(C, Fig. 10).
.
WARNING
The distributor-turntable pressure tests are performed with the wheel mounted.
WARNING
When working, always control the pressure of the turntable