Corghi Artiglio 500, Operator'S Manual

Page: 46 / 265

46 Operator’s manual Artiglio 500
INTRODUCTION
The purpose of this manual is to furnish the owner and operator with a set of practical,
safe instructions for the use and maintenance of the ARTIGLIO 500 tyre changer.
Follow all the instructions carefully and your tyre changer will assist you in your work and
give lasting, efficient service in keeping with CORGHI traditions.
The following points define the levels of danger regarding the machine, associated with
the warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of serious injury or death.
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before powering up the machine. Conserve this manual
and all illustrative material supplied with the machine in a folder near the tyre changer
where it is readily accessible for consultation by the machine operators.
The technical documentation supplied is considered an integral part of the machine; in
the event of sale all relative documentation must remain with the tyre changer.
The manual is only to be considered valid for the machine of the model and with the
serial number indicated on the nameplate applied to it.
WARNING
Adhere to the contents of this manual: Corghi declines all liability in the case of uses
of the machine not specifically described.
WARNING
This machine can only be used properly by a skilled, authorised operator capable of
understanding the written instructions provided by its producer and those of the tyres
and wheel rims. Operators must also be trained and familiar with the safety rules. Use
of the machine by inappropriate staff may involve serious risks for the operator and
for the final user of the product processed (the wheel rim and tyre assembly).
NOTE
Some of the illustrations in this manual have been taken from photographs of prototypes:
standard production machines may vary in some respects.
These instructions are for the attention of persons with basic mechanical skills. We have
therefore omitted detailed descriptions of procedures such as how to loosen or tighten
the fixing devices on the machine. Do not attempt to perform operations unless properly
qualified and with suitable experience. In case of need, contact an authorised Service
Centre for assistance.