CorDES Proprietary Information
15
Figure 9 Setting the Host IP Address and TCP Port
5.2.3
HMI Network Connection Status to Remote CDNA Device
The status of the remote device management connection is displayed (Figure 8) in the Network
& CDNA connection bars (in upper right). If they are green you are successfully connected to
the CDNA device. If they are not green, there is either a temporary disconnect or other network
error. The HMI will attempt to auto reconnect continuously such that temporary network or
DHCP issues will be resolved automatically.
5.2.4
Configuring the Remote CDNA
From the initial page, click the
“DEVICE SETTINGS”
in the left column.
This will take you to the page to modify the remote CDNA Settings as shown in Figure 10.
