69
USER'S MANUAL
Installation for outdoor unit
Wiring Connection
Wiring Diagram
1.
Loosen the screws and remove E-parts
cover from the unit.
2.
Connect the cables respectively to the
corresponding terminals of the terminal board
of the outdoor unit (see the wiring diagram),
and if there are signals connected to the
plug, just conduct butt joint.
3.
Ground wire: Remove the grounding screw
out of the electric bracket, cover the
grounding wire end onto the grounding
screw and screw it into the grounding hole.
4.
Fix the cable reliably with fasteners
(Pressing board).
5.
Put the E-parts cover back in its original place
and fasten it with screws.
Note :
•
This manual usually includes the wiring mode for the different kind of air conditioner.
We cannot exclude the possibility that some special type of wiring diagrams are not
included .
•
The diagram are for reference only. If the entity is difference with this wiring
diagram, please refer to the detailed wiring diagram adhered on the unit which
you purchased.
1
2
L
N
5
3
N(2)
N(2)
4
1
L
N
S
N
Lo
L
S
L
N
3
1
L
N
Connector
If there is a connector, connect it directly.
Constant Speed
Variable Speed
To power
To power
To power
To Indoor unit
To Indoor unit
To Indoor unit
To Indoor unit
To power
E-parts cover
