COP Security XT Series, User Manual

Page: 8 / 70

8
2. QUICK START
1) Connect at least one Monitor to either the VGA, Composite or S-Video Main Monitor output.
2) Connect at least 1 camera to the camera inputs for the DVR to detect a PAL signal.
1) Connect mains power cable to the External PSU and the 12 volt power plug to the DVR.
2) Turn on the power switch.
1) System will start boot sequence (This will take approx. 30 seconds to complete)
2) User will be asked to input a password after boot sequence is completed. (Default password is 0000.)
3) Refer to 3-1-1 (page 11) for instructions to change the password.
1) Live images, date and time will appear on the screen.
2) [A:00%]/[B:00% or NONE] will be displayed in the bottom of left corner to show HDD presence and usage.
NOTE : In some rare instances the DVR may automatically select NTSC as the display type.
Main Symptom: Camera Images appear to “Stutter” (Almost “Time Lapsed” in appearance).
To change the display type back to PAL, disconnect ALL cameras and re-start the DVR.
Once re-started, re-connect the cameras.
The camera images should now be smooth and “Real Time in appearance.
Please call our Technical Support Team for assistance should you need further advice.
2-3. First Display
2-2. Password
2-1. POWER ON
LOADING . . .
ENTER PASSWORD
: _ _ _ _
2. START SYSTEM