COP Security XT Series User Manual Download Page 29

Page: 29 / 70

3-3-7. SETUP-REC-DELETE ALL REC

This function can be used to delete all the recordings stored on this DVR.

We would recommend that after this function has been completed, the HDD(s) is(are) Formatted.

(Please refer to section 3-4-3 on Page 32 for details)

1) Highlight [DELETE ALL REC] by using (

▲

)(

▼

)buttons, and press [ENTER] button.

2) The Confirmation window will show. Press the [ENTER] button to perform the deletion.

3) Press the [MENU] button to exit the Sub-Menu.

Note : It is not possible to perform this function whilst the DVR is Recording.

Recording must be stopped beforehand. (Constant or Schedule Recording).

[SETUP-REC]

- REC PROPERTY

- REC OPTION

- EVENT REC

- SCHEDULE REC

- DELETE REC

- LOCK / UNLOCK REC

-<DELETE ALL REC>

[WARNING!!!]

ALL RECORDED FILE

WILL BE DELETED

ARE YOU SURE?

[ENTER] -> YES [MENU] -> NO

3. SETUP

Summary of Contents for XT Series







































































Search results

Summary of Contents for XT Series

Reviews:

Related manuals for XT Series

Brands by name

Popular brands

COP Security XT Series, User Manual

Search results

Summary of Contents for XT Series

Reviews:

Related manuals for XT Series

Brands by name

Popular brands