COP Security XT Series, User Manual

Page: 15 / 70

15
3-1-8. SETUP-SYSTEM-VGA FREQUENCY CHANGE
This Sub-Menu allows the vertical scanning frequency of the VGA output to be adjusted for the type of
VGA Monitor being used. (Most TFT screens will need this to be adjusted to 60Hz)
1) Once [VGA FREQUENCY CHANGE] is selected using the [ENTER] button the [CHANGE VGA FREQ]
screen is displayed.
2) Press the [ENTER] button to show the [VGA FREQ] options.
3) Select the desired frequency by using (
▲
)(
▼
) button and press the [ENTER] button to apply
4) Press the [MENU] after the change is completed.
3-1-9. SETUP-SYSTEM-SOFTWARE UPDATE
1) Any Software Updates will be carried out by COP SecurityTechnicians within COP Security Premises.
3-1-10. SETUP-SYSTEM-DEFAULT SETUP
1) To restore the Factory Default Settings, select [DEFAULT SETUP] in the System Setup Menu.
2) Press the [ENTER] button to execute the default setup. Press the [MENU] button to exit the menus.
[CHANGE VGA FREQ]
> 50HZ
VGA FREQ
¾
60HZ
¾
50HZ
[SETUP-SYSTEM-DEFAULT
SETUP]
WARNING
Are You Sure?
[ENTER] ->YES , [MENU]->NO
3. SETUP
[SETUP-SYSTEM]
-<ADMIN PASSWORD>
- USER PASSWORD
- PASSWORD CHECK
- TIME SETUP
- TIME FORMAT
- TIME OSD FORMAT
- TIME STAMP FORMAT
- CURRENT STATUS VIEW
- VGA FREQUENCY CHANGE
- SOFTWARE UPDATE
- DEFAULT SETUP
[SETUP-SYSTEM]
-<ADMIN PASSWORD>
- USER PASSWORD
- PASSWORD CHECK
- TIME SETUP
- TIME FORMAT
- TIME OSD FORMAT
- TIME STAMP FORMAT
- CURRENT STATUS VIEW
- VGA FREQUENCY CHANGE
- SOFTWARE UPDATE
- DEFAULT SETUP