Elpro Technologies 450U-E Wireless Ethernet Modem & Device Server User Manual
Rev Version 1.0.12-Beta7
www.cooperbussmann.com/wirelessresources
75
3.
Remove power from 450U-E if it is currently powered on.
4.
Remove the black plastic cover on the front of the Module which will
reveal a USB port and a reset push button switch.
5.
Plug USB stick into USB port and apply power to the 450U-E
Module.
6.
LED will flash as per diagram below.
7.
When complete, remove USB stick from 450U-E and refit the hatch
cover.
8.
Upgrade is now complete; Navigate to the Home page and check
firmware version has been updated and that all other configuration
settings are ok, configuration should not have been changed or erased during this process.
DO NOT remove the Flash drive or interrupt the power to the module while this is
happening. If the upgrade process is interrupted module could become unserviceable
and will need to be returned to ELPRO for repair.
Web based Upgrade
Web based firmware upgrade is available from the System tools page by sele
.
File will typically be named as
X.X-
icate the current firmware version and the
version it will be upgraded to.
If the device firmware version has fallen multiple versions behind the desired version, it may be necessary to upload
When
the patch files have been
eset
the module to perform the firmware upgrade. You will receive more
detailed instructions if it is necessary to upgrade the module firmware.
Figure 85 Webpage Firmware Upgrades
Figure 83 - Side access panel
Figure 84 - Firmware Update LEDs
