Elpro Technologies 450U-E Wireless Ethernet Modem & Device Server User Manual
10
www.cooperbussmann.com/wirelessresources
Rev Version 1.0.12-Beta7
If more than two routers are required within the same radio network, then routing rules may need to be configured (refer
to section 3.13 IP Routing
more details). There is no limit to the number of Bridges in the same network - although
there is a limit of 128 Client units linked to any one Access Point.
Getting Started Quickly
1.1
This instruction will explain what sections of the manual should be read to get the modems configured quickly and easily.
The out of the box basic configuration should cover most applications and require little configuration, however if more
advanced applications are required the 450U-E have many sophisticated features, which can be adjusted if need be.
First, read Chapter
. This will explain the connections that are required for successful operation, i.e.
Power, Antenna, Serial, Ethernet and I/O.
Power the 450U-E and make an Ethernet connection to your PC (for further information on how to do this, refer
to section 3.2 Initial Connection
Set the 450U-E address, and other necessary configuration parameters by using the Quick Start as per section
Save the configuration - the 450U-E is now ready to use.
If the modems are connected to an existing network read section 3.14 Filtering some form of filtering
(MAC, IP and ARP) will reduce the amount of Ethernet network traffic being sent over the radio network.
Before installing the 450U-E, bench test the system. It is a lot easier to locate problems with all the equipment located on
the bench.
Figure 8 - Multi Router