Elpro Technologies 450U-E Wireless Ethernet Modem & Device Server User Manual
Rev Version 1.0.12-Beta7
www.cooperbussmann.com/wirelessresources
73
The drive should contain only one partition, and the Offset value should be non-zero as shown below.
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 1910 MB 64 KB
You can now
format the drive using the diskpart utility.
If the
or if there is more than one Partition, as indicated in the examples below, follow steps 6 and
7 below to re-configure the drive.
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 1911 MB 0 B
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 100 MB 64 KB
Partition 2 Primary 1810 MB 101 MB
6.
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 0 B
* Disk 1 Online 1911 MB 0 B
DISKPART> clean
DiskPart succeeded in cleaning the disk.
DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 0 B
* Disk 1 Online 1911 MB 1910 MB
7.
command, and note that there is only one partition, and that the offset is non-zero.
DISKPART> create partition primary
DiskPart succeeded in creating the specified partiti
Type Size Offset
------------- ---------------- ------- -------
* Partition 1 Primary 1910 MB 64 KB
8.
Finally, the drive can be formatted using the diskpart command line. The file system format should be selected
w the label
