Cooper Hand Tools Weller WR 3M, Operating Instructions Manual

Page: 34 / 418

10-20 WR 3M
7.1 Selecting Menu 1 special functions
Special function Navigation
STANDBY
SETBACK
AUTO OFF
OFFSET
WINDOW
°C/°F
ON TIME
VAC OFF
VAC ON
↓
↑
EXIT
┌ 1 ┐
┌ 2 ┐
┌ 3 ┐
1. Select the desired channel ┌ 1 ┐, ┌ 2 ┐ or ┌ 3 ┐ for entering the
special functions.
2. Press and hold down the UP and DOWN buttons simultaneously.
"– 1 –“ appears in the display after 2 s.
3. Release the buttons.
Selection of the special functions of Menu 1 is activated.
The settings can now be made.
-
Select menu items with buttons ┌ 1 ┐, ┌ 2 ┐.
- Exit the menu again with button ┌ 3 ┐ (EXIT).
Resetting the special functions to the factory settings
1. Press and hold down button ┌ 3 ┐.
2. Then press the UP and DOWN buttons simultaneously.
"FSE“ appears in the display.
The repair station is now reset to the factory settings.
Setting the standby temperature
The standby temperature is automatically set after a temperature
deactivation. The actual temperature flashes in the display.
"STANDBY“ appears in the display.
1. Select the menu item STANDBY in Menu 1.
2. Set the setpoint value for the standby temperature with the UP or
DOWN button.
3. Proceed to the next menu item with the button ┌ 1 ┐ (back) or
┌ 2 ┐ (forward).