Revised: 13/10/2015
PPPrintew
- 6 -
6 of 19
- 6 -
Printed: 14/10/2015
SAFETY PRECAUTIONS
Note:
In the event that the electricity supply cord is damaged it must be replaced with Coonara part #
6306, obtainable from authorised gas retailers.
SAFETY GUARD
INSTALLATION
!
DO NOT
–OPERATE THIS APPLIANCE BEFORE READING THIS
INSTUCTION MANUAL.
DO NOT
– PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT
– STORE CHEMICALS, FLAMMABLE MATERIALS OR SPRAY
AEROSOLS NEAR THIS APPLIANCE
DO NOT
– OPERATE WITH PANELS, COVERS OR GUARDS REMOVED
FROM THIS APPLIANCE.
DO NOT
– ENCLOSE THIS APPLIANCE.
DO NOT
– MODIFY THIS APPLIANCE.
DO NOT
– PLACE ANY ITEM CONTAINING LIQUID ON THE APPLIANCE
THE SAFETY GUARD IN THE GLASS DOOR IS FITTED TO THIS APPLIANCE
TO REDUCE THE RISK OF FIRE OR INJURY FROM BURNS. NO PART OF IT
SHOULD BE PERMANENTLY REMOVED.
IF HEATER IS DAMAGED
DURING REMOVAL OF SAFETY GUARD, DAMAGE WILL NOT BE COVERED
BY WARRANTY.
FOR PROTECTION OF YOUNG CHILDREN OR THE INFIRMED, A
SECONDARY GUARD IS REQUIRED.
THIS APPLIANCE SHALL ONLY BE INSTALLED BY AN AUTHORIZED
PERSON
IN ACCORDANCE WITH ASNZS 5601 (GAS INSTALLATION STANDARD),
MANUFACTURERS INSTALLATION INSTRUCTIONS,
LOCAL GAS FITTING REGULATIONS AND MUNICIPAL BUILDING CODES
.
