12
OPTION DESCRIPTIONS
4
.
PINK / WHITE WIRE SELECTION:
This option controls the Pink / White wire function.
1. Pink / White = Accessory 2
2. Pink / White = Ignition 2 - Default.
3. Pink / White = Start 2
5. DATA PORT PROTOCOL:
ADS iDatalink or EVO / SL Series
This option controls the Data Port Protocol for ADS / OFA Series modules or EVO / SL Series modules. The default is set
for EVO / SL Series Protocol. This option has no effect on conventional wiring of Bypass modules. Both Data Protocols
are 2-Way communication.
6. REMOTE START & AUX OUTPUT: Button Press Selection:
To eliminate the possibility of accidentally opening the trunk or starting the vehicle, there are (3) options for button press
selection. This option will allow you to change whether the Remote starter and Trunk release activate by a:
1. Double button - ½ second presses.
2.
Single ½ second press - Default.
3. Press and Hold 2 seconds. Note: AUX output will stay on until TX button is released
7. HORN CHIRPS with REMOTE START ACTIVATION:
This option allows the unit to provide 3 short chirps for audible confirmation of a remote start. The horn output wire must
be connected for this feature.
Default = OFF.
8. LOCK with REMOTE START:
This option controls whether the unit will automatically lock during and after a remote Start abort or time-out. There are 4
choices for this option:
1. OFF
2. Lock with Remote Start Only - Default.
3. Lock with Remote Start and Lock / Arm with Remote Start Abort - Default.
4. Lock / Arm with Remote Start Abort only
9. BROWN WIRE FUNCTION: AUX 1 - Trunk Release, Dome Light or Horn Honk Output:
This option controls how the Brown output wire of the unit functions. There are 3 choices for this option. This output
can be programmed for 30 second Dome Light with unlock, Trunk Release or Horn Honk.
Default = Trunk Release
