17
MANUAL TRANSMISSION MODE
MANUAL TRANSMISSION INSTALLATION:
This option requires a databus module with hand brake and door status feature. The Door and Hand Brake
Status only work thru Data Mode.
OPTION 11 - TRANSMISSION TYPE: Manual Transmission Requires Tach programmed to operate.
This option selects automatic or manual transmission mode - 3 Choices of operation.
1.
Manual Shift Transmission - Requires Remote Start Button pressed with (-) Hand Brake set.
2. Automatic Transmission – Default.
3.
Manual Shift Transmission – Starts Exit procedure with (-) Hand Brake Set and engine running. Not necessary to
press remote start button.
Manual Transmission Exit Procedure:
1.
Option 11-1:
With engine running and vehicle in neutral, set parking brake, then press “Start” button on transmitter.
The remote starter will turn on and take over operation of the vehicle.
2.
Option 11-3:
With engine running and vehicle in neutral, set parking brake. The remote starter will turn on and take
over operation of the vehicle.
3.
Remove key, exit vehicle (remote starter unit must “SEE” door opened, then closed with engine running).
4.
Press Lock button within 10 seconds of closing door for “Idle Down” (engine stays running). Press Lock a 2
nd
time to
cancel “Idle Down” (engine turns off) and set up Manual Transmission Mode.
5.
Press Lock button after 10 seconds to Lock the doors and shut down the engine. From this point, the system will
remote start the engine unless a door is opened.
6.
Press the Remote Start Button after closing door to set up Manual Transmission Mode without Locking or Arming
OEM Alarm System.
