14
OPTION DESCRIPTIONS
18. MINIMUN STARTER CRANK TIME:
Default = 0.8 seconds
This option controls the Minimum Starter Cranking time. This does not affect maximum crank time. This can be adjusted
in 0.1 second increments Up or Down from 0.5 to 4 seconds. The starter can still crank up to 4 seconds with a 0.8 setting,
depending on Tach or Tachless setting.
TIMED START
, use Hybrid Mode (option 1-4) with this option to set a fixed crank time. Please Note: In Hybrid Mode
there is only 1 start attempt and the ignition is left on.
19. DIESEL GLOW PLUG DELAY:
This option controls the system’s Diesel vehicle interface. Using this option you can select a specific delay time before
cranking. Selections: 4, 10, 15 or 20 seconds.
Default = 4 Seconds
20. REMOTE START ENGINE RUN TIME:
Set engine run time for 10, 20, 30 or 3 minutes as desired.
21. SMART TACHLESS VOLTAGE ADJUSTMENT:
This option controls the voltage reference point when using smart Tachless mode. Pressing the Lock or Trunk buttons on
the remote raises or lowers the reference level in 1% increments from 79%-100%. Button #2 (unlock) resets the unit to
the factory default reference point of 93%. The default 93% setting works for most vehicles.
22. TURBO TIMER: Using Remote Start Button
The optional Turbo Timer mode allows the Data Start system to keep a Turbo or Turbo Diesel vehicle running for 1, 3
or 5 minutes [selectively] after you remove the key and exit the vehicle. This is handy for turbo cool-down without the
need for expensive turbo timers. The
Default = OFF.
23. UNLOCK ON START BUTTON:
While remote started, this option allows the remote start button to unlock the doors with a ½ second press.
24. NOT USED
25. 1-WAY or 2-WAY SYSTEM:
This selects 1-Way or 2-Way antenna system. The 1-Way system uses AM transmission. The 2-Way system uses
FM transmission. The RF range will be much improved using the FM 2-Way antenna system. You must select this
option using the brake pedal or remote control. If you accidentally change system from 1-Way to 2-Way (or vise
versa), you need to use the brake pedal to change option 25 back to correct antenna system.
