2
TABLE OF CONTENTS
Pre-Installation Considerations….………...……...………………………………………………………………..….………..2
Installation Cautions & Warnings………………………………………………………………………………..….....……..…3
5 Pin Power Plug……..…………………………………………………………………………………………....…………......3
Optional 8 Pin Plug...…………………………………….…………….……..…………...….…………..………….………..4-5
AUX Channel Output (Trunk release, Dome light or Horn honk)…..……………………………………………..…………5
Door Lock Diagrams………….……………………….…………………..…..…….…......………………………………….…6
Smart Tachless Mode…..………….…………………………………………………………………………....….…..............7
Tach Programming Options….…………….……………………………...……………………...…..…………..…….………8
Option Programming Table….………. …….………….……………………………..……………..…….....….….....……..8-9
Option Descriptions……………..……………………………...………….……….……..…………………………...……11-15
Antenna Diagram……………………….…………………………………………………………..………………………..….15
Transmitter Programming and 2 Vehicle Programming………………………….….…………….…...…..…..……..........16
Manual Transmission Mode……………………….………………………………...…………………….….……..…………17
System Wiring Diagram……………….………….………………………………...…………………….….……..……..……18
Data Port………………………………………..………………………………..………..….……….…………………………19
Remote Start Diagnostics.…………….…………………………………………………………..…………………….…..….20
PRE-INSTALLATION CONSIDERATIONS
BEFORE BEGINNING
, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS
BRAKES, ENGINE / BODY COMPUTER AND BATTERY).
PLAN OUT YOUR INSTALLATION
and determine most suitable locations for all components to be placed. These components
include: the module itself, valet/program button, possible relays, and antenna/receiver (RS1, RS3 and RS4 only, the RS00 model
does not include antenna or remotes.) Allow enough wire to create a service loop with strain relief, should servicing be required.
This will also allow easier access and mounting.
DAMAGE to the Data Start unit
resulting from incorrect installation or failure to follow guidelines stated in this book will not be
covered under warranty and will be subject to repair or replacement charges.
USE A VOLT OHM METER
to test and locate all connections. Test Lights can damage a vehicle’s computer systems.
ADDITIONAL PARTS
, which are not included with this unit, may be needed for your particular vehicle. These items may include
extra relays or Anti-Theft System Bypass modules.
