16
TRANSMITTER PROGRAMMING
Transmitter Programming:
Notes: Remote Transmitters/Transceivers come pre-programmed from the Factory. When re-learning remotes or adding
remotes, ALL your system’s remote codes must be learned at time of programming!! These systems allow storage of up
to 4 different remote codes in memory.
1.
Turn Ignition Key to the ON position. (Do not start vehicle).
2. Press Program/Valet button 4 times. Wait for the unit to flash the parking lights and park light LED flashes exactly 4
times.
3. Press button #1 of the first transmitter. You should get 1 light flash confirming the remote is coded, then press button
#1 of a second transmitter, the unit will flash 2 times confirming the remote is coded and so on. If all 4 codes are
learned, the unit will automatically exit code learning mode, otherwise turn key off. See diagram below.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
DS1 Only
IGN
OFF
LOCK
PRESS
START ONLY
DS3 thru DS7
COMPLETE
PRESS
2 VEHICLE OPERATION and PROGRAMMING:
To set up the 2 vehicle operation you must have all 4 remotes for
programming. For the first vehicle (remotes 1 & 2) press the Lock as in step 1 thru 3. To change from vehicle 1 to
vehicle 2, press the
VEH
button on remote for about 2 seconds. The LED on remote will change from blue to red.
