23
10.5 Creating Live Movie Clips
You can now create live digital movies using
Digital Camera Manager
.
• Make sure your
Storm C@m
is connected to your PC via USB and run the
Digital
Camera Manager
.
•
Warning! Live Video Mode will erase all images stored in your
Storm C@m
.
Make sure you upload all wanted images before you switch the Digital Camera
Manager to Live Video Mode.
• You can now start to create your live movie clips by following these steps:
1. Switch to Live
Video Mode
Close
Saved .avi le
5. Start/Stop recording live movie
2. Create New Album
4. Adjust frame rate
Live Image
Adjust Resolution
5. Take snap shot
during recording
1. Switch the interface to Live Video Mode by clicking the
button.
2. During your
Digital Camera Manager
installation a folder called “Album” has been
automatically created in the bottom right section of the
Digital Camera Manager
.
Highlight the le called “C:/Windows/Desktop/Album” in the bottom right hand corner.
You can alternatively click to create a new album to hold your images. Name the
album and save it to wherever you want in your PC.
3. If you have already created an album and you want to save image(s) in, double click
the album.
4. Click the
button to adjust the frame rate and the
button to adjust the
resolution (size) of the movie clip.
5. Click
to start record the live images and click
again to stop recording. You can
also take a snap shot during recording by clicking the
button. The movie clip and
snap shot created will appear on the right panel and it will be saved to the album you
created.
