18
8.5 Self-Timer Mode
To use the self-timer feature, press the Mode Button until
appears in the LCD then
press the Shutter Button to start a 10 second self-timer. The
Storm C@m
will issue a short
beep every second and then a long beep just prior to a further short beep which indicates
that the image has been successfully taken. It is a good idea to use the cradle for this.
Important Note:
The Self-Timer Mode cannot be selected when the
Storm C@m
is full.
8.6 Clearing the Stored Images
When you wish to clear the memory of your
Storm C@m
, press the Mode Button until
appears on the LCD. Pressing the Shutter Button once will cause the
Storm C@m
to beep
and the
start ashing. Pressing the Shutter Button again within 5 seconds will clear
all the images stored and reset the image counter.
Important Note:
• Individual images cannot be cleared
• All images will be lost when the memory is cleared. Please make sure you upload your wanted images
before clearing your
Storm C@m
’s memory.
8.7 Changing the Image Resolution
Image resolution can be changed whenever you need.
1. Cycle through the Mode options by pressing the Mode Button.
2. Press the Shutter Button once to change to the alternative resolution.
For Example:
Changing from Hi-Res Mode to Low-Res Mode:-
Press the Shutter Button to Conrm
Changing from Low-Res Mode to Hi-Res Mode:-
Press the Shutter Button to Conrm
