Cool-Icam CIC-260, User Manual

Page: 57 / 63

57
Symptom
Problem
Solution
I cannot access any
PhotoFantasy's templates.
If you need to change batteries, and
retain the images in your G3 ’s
memory, ensure you are connected
to a Mac which is turned on via the
USB cable, which will then draw
power from the PC whilst you
inserting new batteries.
This means there is insufficient
power to upload images to your
computer.
No CD in CD-ROM drive. Put G3 CD in CD ROM drive.
My
G 3
LCD displays " ".
Please also refer to the help files & User Guides that accompany the enclosed
applications.
The LCD on My G3 has frozen.
Ensure you only use a new
CompactFlash™ card for use with your
G3 . Cards that have been used for
other devices may contain material
that has caused your G3 memory to
become confused. Upload any images
to your computer and then remove
and reinstall the batteries in G3 .
No response from any of the function
buttons.
Battery indicator icon is
blinking.
Battery power is too low to continue
taking images.
Upload all images immediately, then
replace battery.
The image counter on the LCD
is flashing after I took my last
image.
The G3 is processing the image.
Wait for the LCD to stop flashing and
then take your next image. You
may need to wait a further 20
seconds before taking the next
image.
The Flash icon and the image
counter on the LCD is flashing
after I took my last image
using the Flash Mode.
The G3 is processing the image and
recharging the flash unit.
Wait for the LCD to stop flashing and
ensure the Green LED is lit inside
the Viewfinder.
I get a blurred image when
uploading my images to my
computer.
There may be a momentory delay
between pressing the shuttle button
and the actual exposure.
Hold your G3 steady until you hear a
"beep" which indicates the exposure
is completed.
Wait for this process to complete. G3 allows for 3 continuous images
to be taken.
I press the shuttle button and
get no response.
My image(s) is black when
loaded into my PC.
The erasing process has not yet
completed while the user is trying to
take the next photo.
The user connects the G3 camera to
the PC while the camera is
processing images.
Wait until the erasing is completed
before taking a photo.
Make sure that the image processing
is completed before connecting to
your PC.