Cooau CU-SPC02, User Manual

Page: 17 / 192

17
the effect on your image. If you change modes, the camera returns to
using the entire scene to determine the correct level of exposure.
4. EIS (Electronic Image Stabilization) : On/Off
This camera is equipped EIS function with 6-axis gyroscope to detect
motion changes. When the camera tilts, moves, shakes, the sensor
use image cross-border compensation algorithm to compensate
the change and produce stable videos, especially in activities with
relatively small angle (about 6 degrees)but fast motion including
cycling, motorcycling, and hand-held uses.
Note:
• EIS does not support 1080P 120fps / 720P 240fps/ 720P 120fps
video resolution. If you choose these video resolution, the EIS will
not be available automatically.
• If you turn on EIS; Time Lapse Video, Auto Low Light and LDC will
not be available automatically. on the contrary, if you turn on Time
Lapse Video, Auto Low Light and LDC, EIS will not be available
automatically.
5. Looping Record: Off / 1min / 3mins/ 5mins
Using Looping Record, you can continuously record video, but save
only the moments that you want. For example, if you select a 5-minute
interval, only the previous 5 minutes are saved when you press the
Shutter button to stop recording.
If you record for 5 minutes and do not press the Shutter button
to stop recording and save, the camera records a new 5-minute
interval by recording over your previous 5 minutes of footage. When