1013AB01 and 1013AB02 Battery (PR2 and PR3) Instructions
*943-340-001*
P/N 943-340-001
Specifications
Design and specifications are subject to change without notice.
Physical Specifications
Product:
Intermec 1013AB01 Rechargeable Li-ion batter
y
Intermec 1013AB02 Rechargeable Li-ion batter
y
Dimensions:
57.6 x 42.0 x 25.
1 mm (2.27 x 1.65 x 0.99 in)
Weight
:
95 g (3.35 oz)
Capacit
y and Output Specifications
Nominal output
:
x
7.4 V
Capacity:
1620 mAh (11.99 Wh)
Temperature and Humidit
y Specifications
Operating temperature:
-10 °C to 50 °C (14 °F to 122 °F)
Charging temperature:
0 °C to 40 °C (32 °F to 104 °F)
Storage tem
perature:
For up to 1 month
-20 °C to 50 °C (-4 °F to 122 °F)
For up to 3 months
-20 °C to 45 °C (-4 °F to 113 °F)
For up to 6 months
-20 °C to 30 °C (-4 °F to 86 °F)
Relativ
e humidity:
0% to 95% non-condensing
Caution: This battery pack may ignite, create a chemical burn hazard, explode, or
release toxic materials if mistreated. Do not incinerate, disassemble, or heat above
100 °C (212 °F). Do not short circuit; may cause burns. Keep away from children.
Use only Intermec charger Models 1002UU02, 1002UU04, CPS024100240, and
AE38. Use of incorrect charger may present a risk of fire or explosion.
CONTAINS
LITHIUM-ION BATTERY. WASTE BATTERY MUST PROMPTLY BE RECYCLED
OR DISPOSED OF PROPERLY. SEE INSTRUCTIONS.
Proper Disposal of Waste Batteries
Some of the substances necessary for the proper functioning of batteries are considered harmful to the
environment and to human health. It is therefore important that those substances be kept out of the
environment.
You play an important role in the protection of the environment:
1. Keep all waste batteries out of unsorted trash.
2. Dispose of all waste batteries in separate collection for treatment and recycling.
Please contact Intermec for the collection option(s) available in your location.
Marking of the battery:
1. The wheeled-bin symbol indicates the requirement for separate collection of the battery.
2. Two letters shown underneath the wheeled bin indicate the presence of a certain substance:
a. Hg means Mercury is present
b. Cd means Cadmium is present
c. Pb means Lead is present
3. The Moebius loop (chasing arrows) indicates that the battery is recyclable.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2012 Intermec Technologies
Corporation. All rights reserved.
Important Rec
ommendations
y
Charge the battery bef
ore use.
y
See “Charging the Battery” f
or approved charging me
thods. Use of this
battery in o
ther devices could result in damage to the device or battery.
y
The temperature range f
or charging batteries is 0 °C to 40 °C (32 °F to
104 °F). Do not charge batter
y packs outside this range. For maximum
battery lif
e, charge batteries at 23 °C (73 °F).
y
Do not store the batter
y at temperatures abo
ve 50 °C (122 °F), such
as inside a car on a hot da
y or in direct sunlight, as this may damage
the battery.
y
Battery usage b
y children should be supervised
.
y
Do not disassemble or open, crush, bend or def
orm, puncture, shred, or
burn.
y
Do not modify the batter
y or attempt to inser
t foreign objects into the
battery.
y
Do not solder directly to the batter
y contacts.
y
Do not immerse the batter
y in water.
y
Do not shor
t circuit the batter
y. Keep the batter
y connector awa
y from
metallic items.
y
Do not apply mechanical shocks or pressure to the batter
y.
y
Avoid dropping the batter
y or the printer. If y
ou suspect that the
battery or printer is damaged, send it to an Intermec ser
vice center
for inspection.
y
Replace batter
y only with another Model 1013AB01 or 1013AB02
battery. These batteries ha
ve been tested in accor
dance with applicable
safety st
andards. Cont
act your Intermec sales represent
ative or
distributor if this battery is no longer a
vailable.
y
Discarded batteries ma
y create a safety hazar
d. Before disposal,
cover the batter
y connector with electrical insulating tape.
1013AB01 | 1013AB02
PR2 and PR3 Battery Instructions
Using the Battery
The Model 1013AB01 and 1013AB02 batteries are rechargeable
lithium-ion batteries designed for use in the PR2 and PR3 Mobile
Receipt Printers.
Charging the Battery
You can charge the 1013AB01 and 1013AB02 batteries with these
Intermec-approved battery charging accessories:
y
Dual Base (Model 1002UU02) (with 1002UC09)
y
Quad Base (Model 1002UU04) (with 1002UC09)
You can charge a 1013AB01 or 1013AB02 battery installed in a
PR2 or PR3 with these accessories:
y
Dual Base (Model 1002UU02) (with 1002UD09)
y
Quad Base (Model 1002UU04) (with 1002UD09)
y
AC Power Supply (Model CPS024100240)
y
Vehicle Power Adapter (Model AE38)
You can charge a battery after partial discharge without affecting
the original battery capacity. The maximum charging time for a
fully discharged battery is 4 hours. (Two batteries in a Dual Base
or Quad Base with 1002UC09 may take up to 6 hours.) It may take
less time to charge the battery depending on the battery charge
level.
