C24AB
6
9. Connect the black lead to
the negative (-) post of the
battery, and the red lead to
the positive (+) post of the
battery with the bolts and
nuts supplied with the
batteries. (figure 3).
10. Place the battery in the
battery box and place the
cover on the battery box.
Place the lifting strap
around the battery box and
fasten it in place snugly. (figure 4).
FIGURE 4
FIGURE 3
SEAT ADJUSTMENT
SECTION 5
The seat on your Solo XT550 is adjustable up and down. In addition, the width of the
armrests are adjustable, and they may be removed from the seat if necessary.
SEAT HEIGHT ADJUSTMENT - There are four height positions. ALWAYS USE THE
LOWEST SEAT POSITION THAT IS COMFORTABLE FOR YOU. To change positions,
remove seat, pull the locking pin from the lower seat base, put the height adjustment tube
in the desired location, and lock in place with pin.
FRONT TO BACK ADJUSTMENT - There are three positions. To change position, remove
the seat plate assembly from the bottom of the seat. Remove the four bolts holding the
upper seat post to the seat plate. Bolt the upper seat post back to the seat plate in the set
of holes that provides the proper seat location (Fig 2).
ARMREST ADJUSTMENT/REMOVAL - Loosen the black plastic knobs on the bottom of
the seat and slide the arms in and out. Tighten knobs when adjusted.
CAUTION
Use caution when adjusting the armrest widths. If the arms are wider than the frame
of the Solo XT550, they may catch on the side of the doorway or other obstacle,
causing damage to the Solo XT550 and possible injury to yourself.