C24AB
7
DISASSEMBLY OF YOUR SOLO XT550 FOR TRANSPORT
SECTION 6
One of the most important features of your Solo
XT550 is the ease with which it disassembles for
transport in a car or van.
STEP 1 - Fold the back down on the seat and
remove the seat by lifting straight up.
NOTE:
The swivel must be in a locked
position (not free swiveling) in
order to remove the seat.
STEP 2 - Disconnect both battery cables.
Disconnect the motor cable from the
Rear Drive Unit. See Figure 5.
STEP 3 - Grasp the Battery Strap and lift each Battery
out. See Figure 6.
STEP 4 - Grasp the handlebar with one hand. With the
other hand, grasp the “T” handle directly behind
the seat base. See Figure 7.
STEP 5 - Lift up on the handle. Continue to lift until the
Front Frame Section is clear of the Rear Drive
Unit. Lifting the “T” handle both releases the
latch and allows you to lift the front away from
the Rear Drive Unit. See Figure 7.
STEP 6 - Fold the tiller down until it latches. The Front
Frame Section may be picked up with one hand
on the “T” handle and the other hand under the
front bumper.
Figure 7
Figure 5
Figure 6
