C24AB
5
ASSEMBLY INSTRUCTIONS
SECTION 4
If your Solo XT550 has been assembled prior to delivery to you, please disregard this
section. Otherwise, proceed as follows:
1. Open Box No. 1 Containing the Front Frame Section. Open the box packed on the floor
and remove the Seat Post assembly.
2. Open Box No. 2 containing the Rear Drive Unit and the Seat.
3. The seat is adjustable in three positions (front to back). Determine which position you
want and adjust at this time according to instruction in Section 5.
4. Bolt the Seat Post assembly
and Armrest Mount Tube to the
seat bottom with six ¼” bolts,
lockwasher, and flatwashers
packed in the parts bag (fig 2 &
3). On XT550 seats you must
use a “seat plate” between the
seat post and the seat (fig 3).
5. Attach the padded Armrests to
the curved Armrest Support with
¼” x 1¾” bolts and lock nuts.
Two 5/16” nylon washers go
between the Armrest and
support (fig 2 & 3).
6. Connect Front Frame Section
and Rear Drive unit according to
the instructions in Section 6.
7. Install the Seat by placing the
Seat Post in the Seat Base on
the Solo XT550. The seat
height is adjustable by
positioning the seat height adjustment tube in one of the holes provided.
ALWAYS USE THE LOWEST POSITION THAT IS
COMFORTABLE FOR YOU. See Section 5.
8. Slide the Seat Arms into the Armrest Support and lock them in place with the two black
plastic knobs from the parts bag. The Seat Arms are adjustable by loosening the
knobs, sliding the Arms in or out, and retightening the knobs.
CAUTION
We recommend that you do not adjust the arms out so far that they are wider than
the base of the cart, they may catch on doorways or other objects, causing damage
to your Solo XT550 or injury to yourself or others. If it is necessary to do so (such as
on the extra large seat) use extra care.
FIGURE 2
