BB2-7030 User Guide – Rev. 1.0
Page 61
Click "View" to look at the selected file. It should be an XML file, and your browser will
recognize it as such if properly formatted.
Click "Delete" to remove a file from the local file directory.
Click "Browse" to select a file for upload from your PC. Once selected, then click "Upload" to
complete the process.
Check "Confirm" and click "Restart" to re-boot the system. This will not cycle power to the
hardware, but will reboot the processor as if power had been cycled. Use this to force an
IP address change remotely. Only the root user is allowed to do this. Upon restart, this page will
not reload and the HTTP connection will be lost.
Note: There may be a delay of several seconds while Flash memory is updated by any of the
above actions.
Note
: Your browser will normally cache files. If you view a file, make configuration changes,
save the file, then view the file again, you may see the old file cached by the browser. To see the
updated file, go to "Internet Options" in your browser's "Tools" menu, and delete temporary
Internet files (or delete cache files). Where you find the “delete cached files” or “delete history”
button will vary by browser. The other alternative is, while viewing the old XML file, hold the
shift key down while you click the browser’s refresh button. Holding the shift key down forces
the browser to get a fresh copy of the page.
The caching problem occurs going the other direction, too. If you upload a file, make changes on
your PC, and re-upload the same file, the browser may send the old file. Again, you will need to
find the button inside your browser options that lets you delete the cached files from your PC.
