Contrel EMS-96 User Manual Download Page 25

Page: 25 / 48

EMS-96

Instruction Manual

IM1200-U v1.6

Pag. 25 / 48

Setup



General



Utility

Utility

Range

Default

Language

english / (optional language)

english

Language used for the display text.

Theme

blue-white / blue-black / yellow-white / yellow-black / red-

white / red-black / gray-white / gray-black

blue-white

Theme is a different combination of colour.

Text dimension

Normal / Big

Normal

Set the dimension of the char of the instantaneous values showed in the display.

Led left 0.1 Wh/VArh/VAh

See Acronym table of Energy

Varh IN

Measured associated at the left frontal led.

Led right 0.1 Wh/VArh/VAh

See Acronym table of Energy

Wh IN

Measured associated at the right frontal led.

LED min period [ms]

10 ÷ 100

Pulse period associated at frontal led.

Setup



General



Display

Display

Range

Default

Brightness

1 ÷ 15

Factory

Set the brightness of the display.

Return default page [min]

1 ÷ 30

After this time the instrument comes back to default page.

Backlight keys

Off / In standby / Always on

In standby

Set the type of the key illumination.

Standby

No / Yes / Short bright / Change page

Yes

Set the type of the standby mode.

Standby entry [min]

1 ÷ 60

After this time the instrument goes in the standby mode, as selected in the previous item.

Refresh measure [s]

1 ÷ 10

Time to refresh the display for displaying instantaneous measurements.

Setup



Instrument



Graphics

Graphics

Range

Default

V/A sampling [Seconds]

1 ÷ 60

Sampling time for the voltage and current graphic trend.

Clear max bar

Yes / No

Reset the maximum signal on the graphic bars.

Summary of Contents for EMS-96

















































Search results

Summary of Contents for EMS-96

Reviews:

Contrel EMS-96, User Manual, Page: 25 / 48

Search results

Summary of Contents for EMS-96

Reviews: