Contrel EMS-96 User Manual Download Page 24

Page: 24 / 48

EMS-96

Instruction Manual

IM1200-U v1.6

Pag. 24 / 48

Setup Items

General

Setup



General



Password

Password

Range

Default

Access key

0 ÷ 999999999

By setting an

Access

key

with a value different by zero, it’ll be necessary to input it to accede to

Setup

Validity key [minutes]

1 ÷ 60

Time of free use of the setup after one access with password.

Keys protect

Yes / No

If is enabled, to modify the setup (from keys) it’s necessary insert the password.

Communication protect

Yes / No

it’s

enabled,

modify

the

setup

(from

communication

interface)

send

the

password

command

before

another

setup

command.

Enable options

0 ÷ 999999999

After the insertion of the code, switch off/on the instrument to enable software options.

Setup



General



Reset

Reset

Range

Default

Global

Yes / No

Reset to factory settings.

Default setup

Yes / No

Reset all settings in setup.

All energies

Yes / No

Reset all energies counted.

TB energies

Yes / No

Reset all energies timebands (not total energies).

Counters

Yes / No

Reset all counters.

TB counters

Yes / No

Reset all counters timebands. (not total counters).

Min-Max

Yes / No

Reset all min and max values.

Max demand

Yes / No

Reset max demand values.

Energies log

Yes / No

Reset energies log.

Setpoint log

Yes / No

Reset setpoint log.

G/S/T/T log

Yes / No

Reset generic, smart, trigger and timed log.

Events log

Yes / No

Reset events log.

Manual reset SP-DO

Yes / No

Manual Reset of the digital outputs used in

Setpoint

mode.

Setup



General



Date/Time

Date/Time

Range

Default

Hour

0 ÷ 23

Actual hour.

Minute

0 ÷ 59

Actual minutes.

Second

0 ÷ 59

Actual seconds.

Day of Week

Monday ÷ Sunday

Actual day of week.

Day

1 ÷ 31

Actual day.

Month

January ÷ December

Actual month.

Year

2000 ÷ 2099

Actual year.

Summary of Contents for EMS-96

















































Search results

Summary of Contents for EMS-96

Reviews:

Contrel EMS-96, User Manual, Page: 24 / 48

Search results

Summary of Contents for EMS-96

Reviews: