44
PC1000i Crimper – Operator Manual
PC1000i Crimper with CrimpIQ™ Controller
Require Measurement
On/Off setting for measurement popup on the initial crimp. Continental recommends
After 1st Crimp:
that users ALWAYS measure the initial hydraulic crimp to ensure that the crimp
target is being reached (within tolerance). Turning this setting on always causes the
crimper to trigger the measurement popup on the initial crimp.
Connect Bluetooth Calipers:
Configuration and support to setup Bluetooth connected calipers.
Check for Update to
CrimpIQ™
Trigger the CrimpIQ™ controller to connect to CrimpCloud® and check for
Controller:
application updates. If found, the controller will download and install the latest
version
of
the
application.
Note:
Internet connection is required.
Check for Update to MyCrimp®:
Trigger the CrimpIQ™ controller to connect to CrimpCloud® and check for
MyCrimp® application updates. If found, the controller will download and install the
latest version of the MyCrimp® application.
Note:
Internet connection is required.
Force CrimpCloud® Operation
Trigger the CrimpIQ™ controller to upload all operational data to CrimpCloud®.
Sync:
Note:
In general, Administrators should not need to manually sync data. The controller will automatically sync data to
CrimpCloud® when appropriate.
Product Information – Email
Provides a way for the Administrator to view the Terms of Service and if
Terms of Service:
required, email them to the main contact for this machine.
View Source Attribution:
Provides information on open source software incorporated into
the
CrimpIQ™
controller.
Settings and Support