manualshive.com logo in svg

Continental Refrigerator PC1000i, Operator'S Manual, Page: 33 / 65

Share
Download
Continental Refrigerator PC1000i Operator'S Manual Download Page 33

33

PC1000i Crimper – Operator Manual 

PC1000i Crimper with CrimpIQ™ Controller

The Crimp Settings section contains status information and also a number of configurable settings that the user  
can change to adjust the crimp run.

Note:

 

Each of these information areas can be configured by pressing the icon to the left of the information.

Favorite:

 

 

If this crimp specification has been saved as a favorite, the name of the favorite will  

 

 

 

be displayed here. To save a new favorite, simply press the favorite icon on the left.

PSI Monitoring/ 

 

The CrimpIQ™ controller has the option to monitor the crimping pressure and alert the user if the  

 

Max PSI:

   PSI is out of range. Press the PSI icon to configure the target PSI and tolerance. 

Crimp Count: 

 

The CrimpIQ™ controller keeps track of the crimps completed. By default, this count goes up but  

 

 

 

 

 

you can also set it to count down. This is configured using the count icon on the left.

 

 

 

Users also have the option to “bump” the count up or down if needed.

Quality Mode:

 

Quality mode automatically stops the crimping process after a specified number of crimps and  

 

 

 

 

 

prompts the user to measure the crimp diameter.  

Crimp Information

Crimp Operations

Summary of Contents for PC1000i


































































Reviews:

No comments