43
PC1000i Crimper – Operator Manual
PC1000i Crimper with CrimpIQ™ Controller
Check Internet
This feature is used to verify the Internet connection. A green check mark indicates a
successful network connection via Ethernet or Wi-Fi. A red exclamation point (!) indicates
there is no network connection. There are circumstances where the Wi-Fi signal is present
but the tablet still cannot access the Internet. To confirm the connection to the Internet, the
“Verify Connection” brings up the ContiFluidSolutions home page in a web browser. If the
site comes up, the CrimpIQ™ controller has a connection to the Internet.
Change Local Time Zone:
Output field to let Administrators know which time zone the tablet is set to. This information
is important for logging and reporting. This can be changed by selecting the correct time
zone from the drop down list.
Dual Pump:
Larger crimpers has a dual pump configuration to improve the speed of operation.
Slow Start Offset (mm):
This setting indicates how far above the target crimp the pump/crimper switches from fast
to full power crimping mode.
Note:
The default value generally does not need to be changed.
User Timeout Length:
Length of time idle (in minutes) before the machine automatically locks and
requires a pin to login.
Note:
This feature has an option to turn off (disables user timeout).
Die Selection Tolerance:
This setting helps the crimper recommend the best die for each crimp. This tolerance value
ensures that the crimper does not recommend a die that is too close to the target crimp
diameter that cannot crimp to the required diameter.
Note:
The default value generally does not need to be changed.
Pressure Compensation
On/Off for Pressure Compensation. Pressure compensation uses the crimp pressure as
Mode:
feedback to improve the accuracy of the first crimp.
Note:
Turning this feature on or off impacts the behavior of the first crimp in crimp operations. It turns the
calibration crimp screen on or off, respectively.
Screen Brightness:
Adjust the screen brightness for best viewing.
Enable Crimp Target
On/Off for a popup letting the user know that the crimper has successfully
Reached Popup:
reached the target.
Enable Crimp Target
On/Off for a sound letting the user know that the crimper has successfully
Reached Beep:
reached the target.
Settings and Support