52
W415-1283 / F / 04.30.18
EN
maintenance
glass / door replacement
Replacement glass/frame assembly shall be replaced as a complete unit as supplied by the appliance
manufacturer.
burner removal
log burner removal
A.
Remove the main door(s) from the appliance, see "main door removal / installation" section for detailed
removal instructions.
B.
Carefully remove the charcoal embers, charcoal lumps, glowing embers and logs from the appliance.
C.
Remove all of the hearth pads, from the appliance, see "hearth pad installation / removal" section for
instructions.
D.
Remove the 4 screws securing the burner in place. Then slide the burner off the orifice and remove from
the appliance.
E.
To reinstall the burner, reverse these steps.
Do not use substitute materials.
Glass may be hot. Do not touch glass until cooled.
Care must be taken when removing and disposing of any broken door glass or damaged components. Be
sure to vacuum up any broken glass from inside appliance before operation.
Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, broken, or scratched.
•
•
•
•
!
WARNING
When reinstalling the burner, ensure that the venturi rests on the orifice.
note:
