finishing
EN
45
W415-1283 / F / 04.30.18
glowing embers
Tear the embers into pieces and loosely layer above the burner ports covering the burner area. Care should be
taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fibre hairs will glow.
The ember material will only glow when exposed to direct flame; however, care should be taken to not
block off the burner ports.
Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition.
PHAZER™
logs glow when exposed to direct flame. Use only certified
“glowing embers” and
PHAZER
™
logs available from
your local authorized dealer / distributor.
charcoal embers
Randomly place the charcoal embers along the front and sides of the log support in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
charcoal lumps
Place the lumps in front of the logs in a realistic manner taking care not to block or close off any of the burner ports.
Do not block or close off the burner ports. Blocked ports can cause an incorrect flame pattern, carbon
deposits and delayed ignition.
When supplied, charcoal embers, charcoal lumps and vermiculite are not to be placed on the burner.
•
•
!
WARNING
Do not block or close off the burner ports. Blocked ports can cause an incorrect flame pattern, carbon
deposits and delayed ignition.
When supplied, charcoal embers, charcoal lumps and vermiculite are not to be placed on the burner.
•
•
!
WARNING
Charcoal embers are not to be placed on the burner.
note:
Do not block or close off the burner ports. Blocked ports can cause an incorrect flame pattern, carbon
deposits and delayed ignition.
•
!
WARNING
