Continental Access CADV-H-XD16 User Manual Download Page 96

Page: 96 / 131

Digital Video Recorder

RW (Rewind) Button

Pressing the

button plays video backward at high speed. Pressing the button again toggles

the playback speed between

and

. The screen displays

and

respectively.

Entering Fast Backward Playback mode from Live Monitoring mode can be password
protected.

FF (Fast Forward) Button

Pressing the

button plays video forward at high speed. Pressing the button again toggles the

playback speed between

and

. The screen displays

and

respectively.

Entering Fast Playback mode from Live Monitoring mode can be password protected.

BACKWARD Button

Pressing the

BACKWARD

button goes to the previous image.

FORWARD Button

Pressing the

FORWARD

button goes to the next image.

SEARCH/STOP Button

Pressing the

SEARCH/STOP

button while in the Playback mode returns the DVR to the Live

Monitoring mode. Pressing the

SEARCH/STOP

button while in the Live Monitoring mode

returns the DVR to the Search mode.

Camera Buttons (1 to 16)

Pressing a camera button will display that camera full screen.

DISPLAY Button

Pressing the

DISPLAY

button will cycle the display through the different screen layouts. The

display modes are: 4x4, PIP, 3x3 and 2x2 (not all formats are available for the 8-channel DVR).

ZOOM Button

Pressing the

ZOOM

button zooms the current playback image on the screen.

Summary of Contents for CADV-H-XD16




































































































































Search results

Summary of Contents for CADV-H-XD16

Reviews:

Related manuals for CADV-H-XD16

Brands by name

Popular brands

Continental Access CADV-H-XD16, User Manual

Search results

Summary of Contents for CADV-H-XD16

Reviews:

Related manuals for CADV-H-XD16

Brands by name

Popular brands