User’s Manual
70
Highlight the
Setup…
box beside
Disk
S.M.A.R.T.
, and press the button. The
S.M.A.R.T.
Setup
screen appears.
Figure 96 — S.M.A.R.T. Setup screen.
Highlight
Enable
, and press the button to toggle between On and Off.
NOTE: If
Enable
is turned Off, you will not be able to make changes to any of the boxes.
Highlight the box beside
Check Time
, and press the button. You can select from
Monthly
,
Weekly
and
Daily
. If you select
Monthly
, you will be asked to set the Day of the Month and
Time. If you select
Weekly
, you will be asked to set the Day of the Week and Time. If you
select
Daily
, you will be asked to set the Time.
Highlight the first box beside
Temperature Threshold
, and press the button. Use the Up
and Down arrow buttons to scroll through the numbers. Refer to the hard disk drive
manufacturer’s documentation for the correct temperature setting. If the temperature of hard
disk drive exceeds the defined threshold, the system triggers an alert.
Highlight the second box beside
Temperature Threshold
, and press the button. Select
either
ºC (Celsius)
or
ºF (Fahrenheit)
, and press the button.
The box beside
Last Check-Time
displays the Date and Time of the last S.M.A.R.T. check.
Highlight
OK
, and press the button to accept the changes. Selecting
Cancel
exits the screen
without saving the changes.
Highlight the
Actions
tab and the System Event Actions screen displays.
Summary of Contents for CADV-H-XD16
Page 2: ......
Page 3: ......
Page 13: ...User s Manual x...
Page 111: ...User s Manual 98...