Contec FX-DS540-AP, User Manual, Page: 62 / 99

4 Setup Preparation
FX-DS540-AP, FX-DS540-APP 53
Explanation of Top Menu and IP Settings
This section describes the top menu, with the IP address and subnet mask settings as examples.
Although individual menu items are not detailed here, they are almost the same as the settings available
in the web browser. Accordingly, see Chapter 5 for details.
Table 4.1 TOP Menu
Menu Description
1.End Exit terminal setup.
2.Setup Select to setup AP.
3.Writing Use this command to save the settings.
4.Reboot
Reboots the AP. Perform a reboot after modifying the
settings (after saving).
The new settings become effective from after the reboot.
5.Change system parameters Change the password or date.
6.Download Download the settings file and firmware from the AP.
7.Upload
Send the settings file or firmware from the PC (terminal) to
the AP and update on the AP.
8.Default
Restore all AP settings to their factory defaults. The IP
address can be excluded.
9.Status Use this command to check the AP settings.
Setting the IP address
(1) Select [2. Setup].
Date: xxxx-xx-xx Time: xx:xx:xx
[CONFIG]
1. Host Name
2. IP Address
xxx.xxx.xxx.xxx
3. Subnet Mask xxx.xxx.xxx.xxx
4. Default Getway xxx.xxx.xxx.xxx
5. Ethernet
6.5GHz
7. -
8. Terminal
Figure 4.12 IP Address Setting Screen
(2) Select [2. IP Address] and enter the IP address assigned to the AP on the wired LAN.
(3) Select [3. Sub-Net Mask] and enter the sub-net mask for the IP address set in step 2.
(4) Select [1. Default Gateway] and enter the IP address of the default gateway.
You do not need to enter an IP address if there is no default gateway.