Contec BX-100n-DC5000-C01, User Manual, Page: 98 / 145

5. BIOS Setup
BX-100n User’s manual
91
Description Choice
HDD Power Down
If set in “Enabled”, the hard disk drive goes into the power
saving mode when no system operation is done after the
specified time duration. Other devices continues to be
active.
Soft-Off by PWR-BTTN
In case of Soft-Off (S5) by the power button, specifies the
delay time to wait till the power button takes effect. In
“
Instant-Off
”
, the power button takes effect immediately
after pushed down. In
“
Delay 4 sec
”
, the power button
need to be pushed and held for 4 seconds to take effect.
Note that the power button is controlled by the OS in case of
Windows.
PWRON after PWR-Fail
Only “On” is supported for the PWRON After PWR-Fail.
This feature is activated whenever a power is returned after
any types of power failures such as outage.
Wake-Up by PCI card
Selecting “Enable” enables On board LAN “WOL” function.
Note that the “PCI Express Wake” setting below should be
Enable alike.