4. Each Component Function
30
BX-100n
User’s
manual
Component Function
LED: POWER, ACCESS, STATUS
There are 3 LED in front of this product.
Table 4.2. Display Contents of LED
LED name
State
Display contents
OFF
Indicates that this product is switched off.
POWER LED
ON (Green)
Indicates that this product is switched on.
ACCESS LED
ON (Orange)
Indicates that the IDE device is being accessed.
OFF
You can control the behavior of LED from the user application. *1
STATUS LED
Flashing, ON (Red)
You can control the behavior of LED from the user application. *1
S-ATA LED
ON (Orange)
Indicates that the S-ATA device is being accessed.
*1 API that controls STATUS LED is available. See the API description file "mtdll_e.chm" included in
/RasUtility/Samples in the CONTEC’s Web site [IPC-SLIB-01] for details.
DC Power Input Connector : DC-IN
To supply the power, always use the power supply listed below.
Rated input voltage
: 12 - 24VDC
Range of input voltage : 10.8 - 31.2VDC
Power capacity
: BX-100n-DC5xxx-C01 12V 4.0A or more, 24V 1.9A or more
: BX-100n-DC5xxx-C02 12V 4.0A or more, 24V 2.0A or more
Table 4.3. DC Power Connector
Connector type
9360-04P (mfd. by ALEX)
Pin No.
Signal name
1 GND
2 GND
3
12 - 24V
4
3
2
1
4
12 - 24V
Applicable connector on the connector side
Housing
: 9357-04 (mfd. by ALEX) or 5557-04R (mfd. by MOLEX)
Contact
: 4256T2-LF (AWG18-24) (mfd. by ALEX) or 5556 (AWG18-24) (mfd. by MOLEX)
Rise time of power supply
Time
12V
Voltage
2 - 30mS
Figure 4.4. Graph of Rise Time of Power Supply
Summary of Contents for BX-100n-DC5000-C01
