Contec BX-100n-DC5000-C01, User Manual, Page: 144 / 145

8. List of Options
BX-100n User’s manual
137
Accessory for Analog I/O
Buffer Amplifier Box for Analog Input Boards (32ch type) : ATBA-32F *1*2
Terminal Unit for Cables (M2.5 x 96P)
: DTP-64(PC) *1
Screw Terminal Unit (M3 x 96P) : EPD-96A *1 *3
Screw Terminal Unit (M3.5 x 96P) : EPD-96 *1
BNC Terminal Unit (for analog input 32ch) : ATP-32F *1
*1 PCB96PS -* optional cable is required separately (recommended length = 0.5m).
*2 External power supply is required (optional AC adapter POA200-20 is available.)
*3 "Spring-up" type terminal is used to prevent terminal screws from falling off.
Accessory for Digital I/O
Screw Terminal Unit (M3 x 37P)
: EPD-37A *1 *2
Screw Terminal Unit (M3.5 x 37P) : EPD-37 *1
General Purpose Terminal (M3 x 37P) : DTP-3A *1
Screw Terminal (M2.6 x 37P) : DTP-4A *1
Signal Monitor / Output Accessory for Digital I/O (32P) : CM-32(PC)E *1
*1 PCB37P or PCB37PS optional cable is required separately.
*2 "Spring-up" type terminal is used to prevent terminal screws from falling off.
Accessory for Counter Input
Differential/TTL input conversion terminal for counter input : CTP-4D *1
Screw Terminal Unit (M3 x 50P)
: EPD-50A *1 *3
Screw Terminal Unit (M3 x 68P) : EPD-68A *2 *3
*1 CNT-68M/50M optional cable is required separately.
*2 PCB68PS-0.5P or PCB68PS-1.5P optional cable is required separately.
*3 "Spring-up" type terminal is used to prevent terminal screws from falling off.