Contec BX-100n-DC5000-C01, User Manual, Page: 17 / 145

2. System Reference
10
BX-100n User’s manual
Table 2.1. Functional Specification < 2 / 3 >
Model
BX-100n-DC5000-C01
BX-100n-DC5121-C01 *1
BX-100n-DC5000-C02
BX-100n-DC5311-C02
I/F 1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector x 2 (Wake On LAN support) LAN
Controller Intel 82573L Controller
USB I/F 4 channels (USB 2.0-compliant)
Keyboard/mouse I/F None *3
General-purpose I/O Inside the 15-pin D-SUB connector (female)
[RAS connector]
Optocoupler isolated I/O 3 channels for each
(However, when using, you need to switch
between the output 1 channel and WDT
external device, and between the input 1
channel and remote reset.) None
RAS function Inside the 15-pin D-SUB connector (female)
[RAS connector]
WDT: 1sec - 255sec (Reset, interrupt, and
external output enabled by time up)
Remote reset : Input signal from external
part. None
PCI Express cable PCI Express 1.0a(x1) standard port
(18-pin PCI Express External Cabling connector x 1)
Analog I/O equivalent to
AIO-163202F-PE *4 None Analog input : Single-end input
32channels,
16bit, 2
μ
sec/ch(Max.)
Analog output : 2channels, 16 bit,
10
μ
sec(Max.)
Digital I/O : 8channels for each,
LVTTL
Counter : 2channels, 32bit up
count, 10MHz(Max.)
Digital I/O equivalent to
DIO-1616L-PE *5 None Digital input : 16channels Optocoupler
isolated input 12 - 24VDC,
corresponding to current
sink output
Digital output : 16channels Optocoupler
isolated open collector
output, current sink output
Counter input equivalent
to CNT-3204MT-LPE *6 None 4channels, LVTTL, 32bit up down counter,
10MHz (Max.)
2-phase / single-phase / single-phase input
with gate control
*3 : Use USB I/F for the keyboard / mouse.
*4 : For more details on this, refer to the manual for CONTEC’s analog I/O board AIO-163202F-PE.
*5 : For more details on this, refer to the manual for CONTEC’s digital I/O board DIO-1616L-PE.
*6 : For more details on this, refer to the manual for CONTEC’s up down counter board CNT-3204MT-LPE.