Contec BX-100n-DC5000-C01, User Manual, Page: 26 / 145

3. Hardware Setup
BX-100n User’s manual
19
Attaching the FG
(1) Use screws to attach the FG.
* Attached screw (M3 x 8)
Figure 3.3. Attaching the FG
CAUTION
The FG pin of this product is connected to the GND signal of the DC power connector (DC-IN).
Note that the connection cannot be cut off.
Fastening the Cable
This product comes with clamps for fixing cables.
Fastening the LINEOUT, USB Cable
(1) The system unit has a hole for attaching cable clamp to USB removal prevention fitting. Using a
cable clamp for a cable with lock-less connector, such as the LINEOUT and USB Cable, prevents the
connector from being unplugged. Use the cable ties and cable clamps appropriately according to
the connecting states and wiring directions of cables.
*1
*2
*1 Attached screw (M3 x 6)
*2 Attached screw (M3 x 8)
Figure 3.4. Attaching the cable clamp