10
Option 3:
STS-S60 Surface Mounted Speaker (Counter Installations)
1. Place the speaker on the customer side of the countertop.
2. Unscrew the two screws on the sides of the speaker housing.
3. Remove the bracket from the back of the speaker housing.
4.
Place the housing bracket on either side of the point of interaction
between the staff and customer, at least 2-3mm away from the glass
barrier.
5. Mark two fixing points and one cable management hole to mount the
housing bracket while ensuring there is access to retrieve the cable.
6. Drill fixing points using a drill bit smaller in diameter than the screws that
will be permanently installed, then drill the hole for the speaker cable.
Housing
fixing points
Cable hole
Fixing points
7. Align the housing bracket into position. Feed the wire through the cable
hole.