16
Option 2:
STS-SJB Break Out Box with STS-Headset
3. Plug the unit’s connectors with BLACK+WHITE and RED wires into the
“Staff Mic” port on the back of the amplifier.
Note
: The BLACK+WHITE
wires should be on the LEFT side of the connector. The RED wire should
be on the RIGHT side of the connector.
4. Connect the headphone’s two audio jacks to the front of the Break Out
Box in their corresponding ports.
5. To use the headphone and microphone, ensure the mute button on the
1. The Break Out Box should be installed underneath the counter using
the screws provided. Ensure it is placed in a convenient location for the
staff to access the mute button while being mindful of the headset cable
length and the position of the staff member.
2. Plug the unit’s connectors with BLACK and YELLOW wires into the “Staff
Spkr” port on the back of the amplifier.
Note
: The BLACK wire should be
on the LEFT side of the connector. The YELLOW wire should be on the
RIGHT side of the connector.
