24
Setup
Reminder:
Move to the next setup area by pressing the settings button.
•
When you enter engineer’s mode, you will automatically start in Setup
Area 1 (Maximum Volume Adjustment).
•
By pressing the settings button one time, you will move to Setup Area 2
(Ducking Adjustment).
•
By pressing the settings button two times, you will move to Setup Area 3
(Hearing Loop Drive Adjustment).
•
By pressing the settings button three times, you will start back at Setup
Area 1 (Maximum Volume Adjustment) and continue to repeat the pro-
cess.
Press the on/off button to save and exit engineer’s mode. Please note that
the amplifier will automatically exit Engineer’s Mode without saving if no
buttons are pressed for 2 minutes.
For best performance:
1. Enter Setup Area 1.
2. Ensure the customer and staff volumes are turned completely down.
3. Adjust staff volume (Volume In) to a comfortable level.
4. Increase customer volume (Volume Out) until feedback occurs.
5.
Gradually decrease customer volume (Volume Out) until feedback is
eliminated.
Please note:
•
Save and exit engineer’s mode after making any adjustments.
•
The amplifier will automatically exit engineer’s mode without saving if no
buttons are pressed for 2 minutes.
Move to the next setup area