lights red:
no power via mains adapter / power via weak batteries
(change batteries - see Chapter 7, point 4)
Does not light: no power via mains adapter / either power by batteries, or
if the batteries are not fitted or are weak no power.
If the indicator [15] does not illuminate or illuminates weak when a button is
pressed and / or the transmitting range becomes shorter then the battery
must be replaced (3 V battery CR 2032, see chapter 7, points 1 to 3)
You should regularly check the device to see that it is safe and working
properly.
Before you clean the device, pull the mains adapter out of the mains
socket.
Use a dry or slightly moist cloth for cleaning the device.
Never immerse the device in water.
Do not use solvents to clean the device.
The company Indexa GmbH hereby declares that EW01 conforms with the
basic requirements and the other relevant regulations of the EU Council
Directive 1999/5/EC. The conformity has been documented.
The complete declaration of conformity can be read at: www.pentatech.de.
Packaging material, used batteries or electrical products must not be
disposed of as household waste. Use your recycling system. Details
are available from your local authority.
Remote control
12. Maint cleaning
13. Declaration of conformity
14. Disposal
#
#
#
#
#
Fault
No reaction to movement
Unit does not react to the remote control
Transmitting distance of remote control is
very short
Unwanted triggering of main unit
Cause
N
i
C
H
U
[6]
)
Sensor range too low
Unit is facing in the wrong direction
Thick wall, glass or metal object is blocking the sensor
o wireless connect on
ode has been lost
Battery is weak
Movement of animals or passing cars
eat sources can trigger the unit
Electrical wiring in the wall can trigger the unit
nit is operating on weak batteries (power LED
illuminates red
Remedy
R
E
R
R
[ ]
S
R
Set adjuster [3] higher
Back side of unit must face the area to be monitored
Change the location of the unit
educe the distance between remote control and unit
nroll the remote control to the unit again (see chapter 10)
eplace the battery (see chapter 10)
educe the range of the sensor using adjuster 3
Change the location of the unit
witch off the heat sorces or change the location of the unit
Change the location of the unit
enew the batteries (see chapter 7, point 4)
16. Fault finding
15. Warranty
In addition to the statutory guarantee from the vendor, the manufacturer
warrants this product for 2 years from date of purchase (proof from receipt)
according to following conditions.This warranty does not affect your legal
rights.
The warranty covers use of the product in normal conditions in private
households. It only covers manufacturing defects and is limited to the
replacement or repair of the faulty components. It does not include wear and
tear, or batteries.
The warranty applies only when the product is used according to the
operating instructions. It does not cover damage arising from misuse,
improper handling, application of force, dust, dirt, water or other
environmental factors, or from incorrect voltage from batteries or power
supply.
The warranty is void when the product has been repaired or tampered by
unauthorised persons and when it has been used with components which are
not specified by the manufacturer.
In case of a warranty claim please contact the vendor for details of how to
proceed and how to return the product if necessary. Only carriage paid
authorised returns will be accepted. Repairs can only be accepted when
accompanied by a full description of the fault. After the warranty period has
expired repairs will be charged and are not always possible. Warranty claims
do not extend the warranty period and the warranty for replacement parts
expires with the warranty for the product.
Unless there is a statutory obligation, the manufacturer is not responsible for
further claims, including peronal or material damages, arising from the use
of the product or from nonfunction or misfunction of the product.
Indexa GmbH, Paul-Böhringer-Str. 3, 74229 Oedheim, Germany
www.pentatech.de
GB - 21
