![background image](http://html.mh-extra.com/html/conrad/c-control-pro-mega-series/c-control-pro-mega-series_manual_2654183043.webp)
34
Hardware
© 2008 Conrad Electronic
Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby,
and Extended Standby
Software Selectable Clock Frequency
ATmega103 Compatibility Mode Selected by a Fuse
Global Pull-up Disable
·
I/O and Packages
53 Programmable I/O Lines
64-lead TQFP and 64-pad MLF
·
Operating Voltages
2.7 - 5.5V for ATmega128L
4.5 - 5.5V for ATmega128
3.4.1
Module
Pin Layout of the Module
The Mega128 Module is shipped on 4 dual row (2x8) square pins. For hardware application the
corresponding socket strips must be organized in the following pitch format:
In the graph the socket strip
X1-X4
and
then the
first two pins
of the socket strip can be seen. Pin
1
of strip
X1
corresponds to terminal X1_1 (see
).
Module Memory
The C-Control Pro 128 Module provides 128kB FLASH, 4kB EEPROM and 4kB SRAM. A
supplementary EEPROM with an 8kB memory depth and an SRAM with a 64kB memory depth is
mounted on the application board. The EEPROM can be addressed by an I2C interface.
Summary of Contents for C-Control Pro Mega Series
