background image

85

C-Control Pro Mega Series

© 2008 Conrad Electronic

Conditional Compiling

#ifdef symbol

...

#else  

// optional

...

#endif

It is possible to monitor which parts of the source texts are really being compiled. After a 

#ifdef

symbol

 instruction the following text is only compiled when 

symbol

 has also been defined by 

#define

symbol

.  

If there is an optional 

#else

 instruction then the source text will be processed after 

#else

 if the

symbol

 has not been defined.  

Insertion of Text

#include path\file name

By this instruction a text file can be inserted into the source code.  

 Because of some restrictions in the Preprocessor a path within a 

#include

 instruction must not

contain any blank characters!

5.1.2.1

Predefined Symbols

In order to ease the work with different versions of the C-Control Pro series there are a number of
definitions which are set depending on target system and Compiler project options. These constants
can be called up by 

#ifdef,

 

#ifndef

 or 

#if

.  

Symbol

Meaning

  MEGA32

  Configuration for Mega 32

  MEGA128

  Configuration for Mega 128

  MEGA128CAN

  Configuration for Mega 128 CAN Bus

  __DEBUG__

  Debug Data will be created

  __MAPFILE__

  A Memory Layout will be computed

The following constants contain a string. It is sensible to use them in conjunction with text outputs.  

Symbol

Meaning

  __DATE__

  Current Date

  __TIME__

  Time of Compiling

  __LINE__

  Current Line in Sourcecode

  __FILE__

  Name of Current Source File

  __FUNCTION__

  Current Function Name

Summary of Contents for C-Control Pro Mega Series

















































































































































































































































Reviews: