143
C-Control Pro Mega Series
© 2008 Conrad Electronic
Description
Writes one word into the EEPROM at position pos. The first 32 byte are reserved for the OS of C-Control
Pro. Therefore a pos value of 0 and higher accesses the EEPROM memory at position 32 and upwards.
The value of pos describes a byte position in the EEPROM. This should be taken care of when using word
or floating point accesses.
Parameter
pos byte position in EEPROM
val new EEPROM value
6.7.6
EEPROM_WriteFloat
EEPROM Functions
Syntax
void EEPROM_WriteFloat(word pos,float val);
Sub EEPROM_WriteFloat(pos As Word,val As Single)
Description
Writes a floating point value into the EEPROM at position pos. The first 32 byte are reserved for the OS of
C-Control Pro. Therefore a pos value of 0 and higher accesses the EEPROM memory at position 32 and
upwards. The value of pos describes a byte position in the EEPROM. This should be taken care of when
using word or floating point accesses.
Parameter
pos byte position in EEPROM
val new EEPROM value
6.8
I2C
The Controller provides an I2C Logic which allows effective communication. The Controller
operates as an I2C Master (single master system). A slave operating mode is possible
but not yet implemented in the current version.
6.8.1
I2C_Init
I2C Functions
Syntax
Summary of Contents for C-Control Pro Mega Series
